-
24
Jun
Household heating common sense, how much do you know?Now living conditions are getting better and better, presumably most families have installed floor heating, but how much do you actually know about fl -
24
Jun
The advantages and disadvantages of the floor heating system and the selectio...Spring turned to fall and winter came again, and heating entered every home. Heating is a new technology, which is being used more and more widely in -
24
Jun
Do you know the four elements of a complete underfloor heating system?At present, the floor heating is a common family heating method in the market, compared with the traditional radiator heating, the floor heating tempe -
21
Aug
Five steps to teach you to install PPR water pipes correctly.The water pipes used for decoration now are PPR water pipes with higher safety, longer service life and easier installation. The installation of PPR w -
07
Aug
The advantages of PE pipes in agricultural irrigation.In recent years of farmland water conservancy irrigation, PE pipe water irrigation has shown its unique advantages compared with irrigation canals: 1. -
07
Aug
Definition of solid-wall, structural-wall, and composite pipes.solid-wall pipe flat wall tube straight wall tube Any cross-section is the same annular pipe with solid wall. Note 1: Tubing designed with slightly pr -
19
Dec
Tips for purchasing ppr water pipe joints.In terms of overall performance, PPR pipe is a cost-effective pipe material, so it has become the preferred material for renovation of home improvemen -
21
Sep
What is the home floor heating system?Home floor heating system 1, heat source Usually, the radiant floor heating system is completed by the main heat source of the gas fireplace. In some -
21
Sep
What are the general advantages of floor heating systems?1. Comfortable heating. The heating is uniform, the heat energy is uniform and constant flow from bottom to top, forming a gradient temperature differ -
17
Jun
What is compression connectionThe connection and sealing principle of the ferrule connection is that when the nut is tightened, the ferrule is under pressure, so that its edge bit -
16
Jun
Performance testing requirements of valves1.When a valve is manufactured in batch, the official organization shall be entrusted to perform the following performance tests: ① the opening and cl -
15
Jun
Valve cleaning procedureThe parts of the valve must go through the following process before assembly: 1. According to the processing requirements, some parts need to be polis
Send Inquiry

